Kpd series mpeg-4 dvr manual

All lead-free products offered by the company comply with the requirements of the European law on. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be. This applies to your product and any peripherals. Do not dispose of these products as unsorted municipal waste. Please read this instruction thoroughly before operation and retain it for future reference.

The image shown above may differ from the actual product appearance. Previous Page. Next Page. Recpro series 3g active call-out digital video recorder pages. Page 2: Package Contents 1. Package Contents 1. Page 3 Channel selection under quad selection mode In the quad display mode, press one of these four buttons to select the channel display.

Page 4: Rear Panels Enter Confirm the password entering. In the advanced menu, press this button to confirm the settings and go back to the upper layer. When users start recording, the audio input will also be recorded with corresponding video channel. Page 6: Camera Connection 3. Connect the camera with the indicated power supply, and connect the camera video output to the DVR video input port with a coaxial cable or RCA lines with BNC connectors.

Page 7: Password Setting 3. Page 10 1. Page 14 3. Page 15 3. Page 18 1. Page 23 3. Move the cursor to the camera title you want to change, and press enter button on the control panel of the DVR to access the character selection screen. Assign a new name to the camera up to six characters letters or symbols or numbers.

The found address es will be listed, and can be added into the address book by clicking Add into address book. Then, the playback control panel will be shown at the bottom of the main control panel similar to the following.

You will see a screen similar to the following with 7 major sections: Button Function Description To log in, choose one IP address from the address list, and click the address twice; to log out, click the connected IP address twice. Refresh Click to update the available IP address list.

Note: You need to be a supervisor to operate this function. Turbo Step Speed up the menu selection under the AP from 1 to Ex: If the value of the turbo step is set to 5, one mouse-click will function as 5 mouse-clicks when you click one of the buttons in the DVR control panel.

The bigger the value is, the higher sensitivity for motion detection. The highest sensitivity is Alarm Select N. Event Select to display the event symbol in the live view. The file will be shown in the list. The result will be displayed in the log list, arranged by time from the earliest to the latest. Play Click to play the selected record log. The playback panel will be shown for your further operation. For the function of each button, please refer to the following description.

Function Description Channel Click the channel No. You will be prompted to enter the user name and password to access the DVR. Press to enter the DVR full search menu. Search You can check all the logs here, and select one of them to payback. You need to have QuickTime installed in you operation system first, and you can access the DVR to see the live view.

Magnetic Contact: When the magnetic contact is opened, the alarm will be triggered and the recording is on. The table describes some typical problems and also their solutions. Please check them before calling your DVR dealer. This manual is also suitable for: f f f Print page 1 Print document 73 pages. Rename the bookmark. Delete bookmark? Cancel Delete.